Dorman - Autograde | BuyAutoPartsNow

Wheel Lug Nut Dorman - Autograde 611-204.1

9/16-18 flattop acorn nut - 7/8 in. Hex, 1-1/2 in. Length

The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.

Dorman - Autograde

Part # 611-204.1 | Line Code: DOR

Gray wheel nut cover m24-2.0, hex 19mm

This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.

Dorman - Autograde

Part # 611-621.1 | Line Code: DOR

Oil drain plug pilot point m12-1.75, head size 15mm

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Dorman - Autograde

Part # 090-034.1 | Line Code: DOR

Wheel nut m12-1.50 acorn - 19mm hex, 30.70mm length

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Dorman - Autograde

Part # 611-221.1 | Line Code: DOR

1/2-20 serrated wheel stud - .673 in. Knurl, 1-19/32 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-103.1 | Line Code: DOR

M14-1.50 serrated wheel stud - 15.88mm knurl, 43mm length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-329.1 | Line Code: DOR

9/16-18 serrated wheel stud - .623 in. Knurl, 2-5/32 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-182.1 | Line Code: DOR

9/16-18 serrated wheel stud - .643 in. Knurl, 2-1/8 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-305.1 | Line Code: DOR

Wheel nut m14-2.0 flanged flat face - 21mm hex, 44.98mm length

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Dorman - Autograde

Part # 611-230.1 | Line Code: DOR

M14-2.0 serrated wheel stud - 15.85mm knurl, 77.90mm length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-485.1 | Line Code: DOR

Wheel nut 1/2-20 standard - 3/4 in. Hex, 9/16 in. Length

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Dorman - Autograde

Part # 611-027.1 | Line Code: DOR

Self tapping screw-hex washer head-no. 12 x 3/4 in.

Dorman offers a comprehensive selection of screws for almost any automotive fastening job. A large selection of diameters, lengths and quantities are available in different assortments and/or kits. A multitude of thread varieties are available. Check the product details to make sure you have the right size and quantity for what you need.

Dorman - Autograde

Part # 700-213 | Line Code: DOR

M12-1.50 serrated wheel stud with clip head - 14.94mm knurl, 41mm length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-285.1 | Line Code: DOR

1/2-20 serrated wheel stud - 0.627 in. Knurl, 1.9 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-569.1 | Line Code: DOR

Rivet-nylon push-hole diameter .275 in.

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They're available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Dorman - Autograde

Part # 700-850 | Line Code: DOR

Hard vacuum tubing connector assortment

Dorman manufactures a comprehensive selection of Vacuum and Emissions Fittings for almost any automotive Vacuum job. We also offer Vacuum Tubing, sold separately.

Dorman - Autograde

Part # 47308 | Line Code: DOR

M12-1.50 serrated wheel stud - 12.80mm knurl, 54mm length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-323.1 | Line Code: DOR

9/16-18 serrated wheel stud - .666 in. Knurl, 2-5/16 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-389.1 | Line Code: DOR

M12-1.50 serrated wheel stud - 12.95 mm knurl, 52.9 mm length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-543.1 | Line Code: DOR

Standard o-rings value pack- 32 sku's- 407 pieces

This O-ring assortment is designed to match the fit and function of the original O-rings required for common repairs on specified vehicles, and is engineered for durability.

Dorman - Autograde

Part # 799-453 | Line Code: DOR

1/2-20 serrated wheel stud - .619 in. Knurl, 2-3/16 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-290.1 | Line Code: DOR

Oil drain plug pilot point m12-1.75, head size 13mm

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Dorman - Autograde

Part # 090-175CD | Line Code: DOR

Compression fitting-union- 3/16 in.

Dorman offers a comprehensive line of Compression Fittings for almost any automotive repair job. All our Compression Fittings are constructed of high-quality materials for long-lasting durability. Not recommended for hydraulic brake systems.

Dorman - Autograde

Part # 490-022 | Line Code: DOR

Black wheel nut cover m27-2.0, hex 22mm

This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.

Dorman - Autograde

Part # 611-623.1 | Line Code: DOR

1/2-20 serrated wheel stud - .618 in. Knurl, 1-15/32 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-364.1 | Line Code: DOR

Wheel nut m12-1.25 standard - 19mm hex, 16mm length

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Dorman - Autograde

Part # 611-064.1 | Line Code: DOR

M12-1.50 serrated wheel stud with clip head - 13.89mm knurl, 48.73mm length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-482.1 | Line Code: DOR

Wheel nut 1/2-20 dometop - 3/4 in. Hex, 1-5/8 in. Length

The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.

Dorman - Autograde

Part # 611-094.1 | Line Code: DOR

Blind rivet retainer-gm-diameter 3/16 in.

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They're available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Dorman - Autograde

Part # 963-205 | Line Code: DOR

Wheel nut 1/2-20 dometop - 3/4 in. Hex, 1-1/16 in. Length

The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.

Dorman - Autograde

Part # 611-091.1 | Line Code: DOR

Wheel nut 9/16-18 standard - 1 in. Hex, 21/32 in. Length

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Dorman - Autograde

Part # 611-053.1 | Line Code: DOR

Wheel nut 1/2-20 acorn - bulge seat - 13/16 in. Hex, 1.385 in. Length

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Dorman - Autograde

Part # 611-153.1 | Line Code: DOR

Oil drain plug piggyback 1/2-20 s.O., head size 3/4 in.

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Dorman - Autograde

Part # 65208 | Line Code: DOR

M14-1.50 serrated wheel stud - 15.88mm knurl, 76mm length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-326.1 | Line Code: DOR

Wheel nut m12-1.50 mag - 21mm hex, 32.5mm length

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Dorman - Autograde

Part # 611-168.1 | Line Code: DOR

1/2-20 serrated wheel stud - .668 in. Knurl, 1-3/4 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-174.1 | Line Code: DOR

Wheel nut m12-1.50 metric - 19mm hex, 41.6mm length

The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There's often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.

Dorman - Autograde

Part # 611-980.1 | Line Code: DOR

Wheel nut m14-1.50 acorn - 23mm hex, 30mm length

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Dorman - Autograde

Part # 611-118.1 | Line Code: DOR

M12-1.50 serrated wheel stud with clip head - 14.60mm knurl, 44.50mm length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-476.1 | Line Code: DOR

Compression fitting-union-5/16 in.

Dorman offers a comprehensive line of Compression Fittings for almost any automotive repair job. All our Compression Fittings are constructed of high-quality materials for long-lasting durability. Not recommended for hydraulic brake systems.

Dorman - Autograde

Part # 785-306 | Line Code: DOR

1/2-20 serrated wheel stud - .625 in. Knurl, 1-1/2 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-126.1 | Line Code: DOR

1/2-20 serrated wheel stud - .618 in. Knurl, 1-13/16 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-260.1 | Line Code: DOR

Oil drain plug standard m14-1.50, head size 17mm

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Dorman - Autograde

Part # 090-033.1 | Line Code: DOR

M12-1.50 wheel cover retaining nut - 19mm hex, 37.48mm length

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Dorman - Autograde

Part # 611-229.1 | Line Code: DOR

1/2-20 serrated wheel stud - .550 in. Knurl, 2.2 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-561.1 | Line Code: DOR

M14-1.50 serrated wheel stud - 15.88mm knurl, 90.5mm length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-333.1 | Line Code: DOR

1/2-20 serrated wheel stud - .589 in. Knurl, 1-15/16 in. Length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-252.1 | Line Code: DOR

M14-1.50 serrated wheel stud - 15.96mm knurl, 57.94mm length

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Dorman - Autograde

Part # 610-435.1 | Line Code: DOR

Dorman - Autograde

Filter

Parts Catalog